Advertisement
10
10
Place the armrest onto the top of the upper
shaft, lining up the central hole in the
armrest with a hole in the aluminium shaft.
Position the armrest to suit your arm length.
(Holding the Detector, pg. 15)
Insert the screw up through the stand, upper
shaft and armrest. Tighten the screw, being
careful not to overtighten and damage the
thread.
With the velcro side facing upwards, thread
the armrest strap through both slots in the
armrest. Ensure the end of the strap will
be fastened outwards from your arm.
The X-Terra is designed to be used in both the
left and right hand. This diagram shows the
velcro strap threaded outwards for the left arm.
Connecting
With the LCD facing up, push the control
box onto the end of the handle until it
fi ts into place.
The LCD window has a protective
fi lm affi xed to prevent scratching.
This may be removed when the
detector is fully assembled.
The control box may be easily removed
for packing and transport in a carry bag.
Disconnecting
Brace the detector fi rmly against
yourself, grasp the control box and
pull it away from the handle.
11
Advertisement
