Care And Maintenance - Sportline Solo 910 User Manual

3. At 5 seconds before finish, the Watch will start to beep. This will
continue for 15 seconds.
4. To stop the beeping early, press any button (except the
LIGHT button).
5. The Countdown Timer will then return to the original
countdown time.
• To reset the Countdown Timer to the original countdown time, press the
RESET button once when the Timer is stopped.
• To reset the Timer while the Timer is running, press the ST/STP button to
stop the counting, then press the RESET button.

Care and Maintenance

To ensure proper function of your Sportline Solo 910 Heart Rate
Watch:
• Avoid rough usage or severe impacts to the Watch
• Keep the front sensor and back metal plate free from dirt, oils, or
other contaminants
• Periodically clean the Watch, using a soft cloth, with a mild soap and
water or similar cleaning solution
• Keep the Watch out of extreme heat or cold
• Do not expose the Watch to intense direct sunlight for long periods
of time
• Do not expose the Watch to chemicals such as gasoline, alcohol,
or solvents