Table of Contents
Advertisement
Washer
Front handle
Plug
Oil
Gasoline
Fuel mix chart
(50 : 1)
US
GAS
OIL
GAL.
FL.OZ.
1
2.6
2
5.1
5
12.8
ASSEMBLING
Chuck
Drill bit
OPERATION
1
50
METRIC
GAS
OIL
L
mL
4
80
8
160
20
400
FRONT HANDLE
•
Insert the front handle to the machine, and turn
clockwise. (TIGHTEN THE SCREW FIRMLY)
- To operate front handle with right hand,
remove right plug then reverse sides when
installing handle and plug.
DRILL BIT
•
Loosen the chuck and insert the drill bit (not
provided with unit). Then tighten the chuck by
turning it clockwise.
IMPORTANT
Use drill bits suited for the material being
drilled and for the depth of hole required.
CHECK UP OF NUTS AND OTHER
HARDWARES
•
Check up loose nuts, bolts and screws before
using the unit every day.
FUEL STATEMENT
GASOLINE - Use 89 Octane [(R+M)/2] gasoline or
gasohol known to be good quality- Gasohol may
contain maximum 10% ethyl (grain) alcohol or 15%
MTBE (methyl tertiary- butyl ether). Gasohol
containing methyl (wood) alcohol is not approved.
OIL - ECHO brand premium two-strokes 50 : 1 oil
is preferred. Mix oil and gasoline/gasohol according
to Instructions on the oil container label.
MIXING - Follow directions on the container.
7
Advertisement
Table of Contents
