Something Wrong - Indesit FIU20 MK2 Instructions For Installation And Use Manual

Something Wrong?

Before calling a Service Engineer, please check through the following lists.
Problem
Slight odour or small amount of
smoke when grill / oven is used
for the first time.
Nothing works.
Display shows 0.00 AUTO.
Main Oven does not work, but
the Grill and Top Oven work.
Top Oven and Grill do not work,
but the Main Oven works.
Grill keeps turning on and off.
Can not set an "Auto Cook"
programme
Draught from beneath control
panel.
Timer/Buzzer/Bleeper operates
continually
If you have been through the above list and there is still a problem, contact Service,
30
THERE MAY BE NOTHING WRONG.
Check
This is normal and should cease after a short period.
If you find :-
Display is blank.
Then it is likely that there is no electricity supply to your oven.
Check: (i) That the main cooker wall switch is turned on.
(ii) Check other appliances to see if you have a power cut.
(iii) Check the main circuit breaker for the property.
The power supply to your oven has possibly been interrupted, but has
now come back on again. Reset the timer to the correct time of day and
"Manual" operation using instructions given in the timer section of the
book.
Check the following to ensure that the timer is in Manual Mode:
Check that the Auto Symbol is not lit up and is not flashing.
See timer section for instructions on how to return timer to
"Manual".
Operating the cooker under the following conditions may cause a safety
device to operate.
(a) Grilling with the door closed - always grill with the door open to the
correct position - see grilling.
(b) Grilling for an excessively long period at maximum setting -
see grilling guide.
(c) Grilling with inadequate ventilation in the cabinet - see installation
instructions.
When the "Grill" control (A) is operating at less than "max", the grill will
cycle on and off, this is normal and is not a fault.
Remember: "Cook Period" is the actual length of time for which, the
timer will switch the oven(s) on as part of an "Auto Cooking" programme.
A gentle flow of air will be blown from beneath the control panel when
the appliance is used. If the appliance is still warm, this cooling fan may
run on, or restart itself after all of the controls have been turned off.
The fan will stop once the appliance has been cooled. This is normal and
not a fault.
Press the minute minder button to silence.
(see Key Contacts, back page)