Honeywell Heating Controller SDC Operating Instructions Manual page 42

Operation
4.2.2.4.3.1
Source day
Target day
NOTE
42
Copying switching time programs (days)
Block programming enables the switching times and cycle
temperatures of any day of the week to be copied
1 – To any days within the week (Mo, Tu, We, ..., Su)
2 – To all weekdays (Mo to Fr)
3 – To the weekend (Sa to Su)
4 – To the entire week (Mo to Su)
Calling up the copy function (days)
See flowcharts on pg. 44
► Press input button
► Turn input button
copied.
The respective automatic program P1 (P2, P3) of the source
day is copied in the display with the time switch symbol and
the program index.
► Press input button
The source day appears flashing.
► Turn input button
confirm by pressing the input button
• The following target days (Mo to Su) individually
• All days of the week (1 to 7) as a week block
• All weekdays (1 to 5) as a weekday block
• The weekend days (6 to 7) as a weekend block
Acceptance is confirmed by acknowledging DAY COPY OK.
After acknowledgement, the following target days appear one
after another automatically with each additional press of the input
button î and can be skipped and accepted if necessary.
Pressing the button causes an immediate return to the basic
display.
Only complete days with all cycles and temperature specifications
and the respective program can be copied.
î
to confirm the copy function.
î
to select the source day (MO to SU) to be
î to confirm the source day.
î to select the following setting values and
SDC / DHC
î :
EN2H-0220GE51 R1111