Fru Tests - Lenovo ThinkPad R60 Hardware Maintenance Manual

Product overview

FRU tests

The following table shows the test for each FRU.
(continued)
40
MT 0656, 0657, 0658, 0659, 9455, 9456, 9457, 9458, 9459, 9460, 9461, 9462, 9463, 9464
FRU Applicable test
System board 1. Diagnostics --> CPU/Coprocessor
2. Diagnostics --> Systemboard
3. If the ThinkPad Advanced Dock, the ThinkPad Advanced Mini
Power Diagnostics --> ThinkPad Devices --> AC Adapter, Battery 1
(Battery 2)
LCD unit 1. Diagnostics --> Video Adapter
2. Interactive Tests --> Video
Modem daughter card 1. Make sure the modem is set up correctly.
(MDC-1.5) 2. Replace the modem jack and the modem card in turn, and run
Audio 1. Interactive Tests --> Internal Speaker
2. Diagnostics --> Other Devices --> Analog Devices HDA
Speaker Interactive Tests --> Internal Speaker
PC Card slot 1. Diagnostics --> Systemboard --> PCMCIA
2. Insert a PC Card Wrap Plug into every PC Card slot, and run
ExpressCard slot 1. Insert a PCI-Express/USB Wrap card into the ExpressCard slot.
2. Turn on the computer.
3. Run Diagnostics --> ThinkPad Devices --> ExpressCard slot.
Keyboard 1. Diagnostics --> Systemboard --> Keyboard
2. Interactive Tests --> Keyboard
Hard disk drive Diagnostics --> Fixed Disks
Diskette drive 1. Diagnostics --> Diskette Drives
2. Interactive Tests --> Diskette
DVD drive or 1. Diagnostics --> Other Devices --> CD-ROM/DVD
DVD/CD-RW combo 2. Interactive Tests --> CD-ROM/DVD Test
drive
Memory 1. If two DIMMs are installed, remove one of them and run
2. If the problem does not recur, return the DIMM to its place,
3. If the test does not detect the error, run Diagnostics -->
Fan 1. Turn on the computer and check the air turbulence at the
2. Run Diagnostics --> ThinkPad Devices --> Fan.
Dock or the ThinkPad Essential Port Replicator is attached to
the ThinkPad computer, detach it. Place the computer on a
horizontal surface, and run Diagnostics --> ThinkPad Devices
--> HDD Active Protection Test.
Note: Do not apply any physical shock to the computer while
the test is running.
the following tests in Diagnostics --> Communication:
a. Conexant Smart Modem Interrupt
b. Conexant Smart Modem Dialtone
CODEC Test
Diagnostics --> Systemboard --> PCMCIA External Loop
Diagnostics --> Memory Test—Quick.
remove the other one, and run the test again.
Memory Test—Full.
louver near the PC Card slot.