Advertisement
QUICK START: GETTING UP TO SPEED
The following guide is an overview of the procedures for getting your model running, from opening the box to breaking in and
tuning your engine. Refer to the pages indicated for details on each step. Look for the Quick Start logo on the bottom corners of
Quick Start pages.
1. Read the safety precautions on page 4
For your own safety, understand where carelessness and misuse
could lead to personal injury.
2. Charge the EZ-Start battery pack • See page 21
The EZ-Start requires a fully charged battery pack (included).
3. Detail the body • See page 9
The Nitro Slash body comes with most decals already applied. If you
wish to add more decals, do it now before you break-in your engine.
4. Install the antenna - See page 13
The receiver antenna and antenna tube must be properly installed
before operating your model.
5. Install batteries in the transmitter • See page 10
Nitro Slash requires 4 AA alkaline or rechargeable batteries
for the transmitter.
6. Install the receiver batteries • See page 10
The Nitro Slash requires 4 AA alkaline or rechargeable batteries for the
receiver.
7. Install the EZ-Start battery • See page 22
Install and connect the charged battery pack in the EZ-Start controller.
8. Turn on the radio system • See page 10
Make a habit of turning the transmitter on first and off last.
9. Check servo operation • See page 12
Make sure the throttle and steering servos are
working correctly.
10. Range test the radio system • See page 12
Follow this procedure to make sure your radio system works properly at
a distance and that there is no interference from outside sources.
11. Fill the fuel tank • See page 19
Use a fuel-dispensing bottle to fill the tank.
12. Connect the EZ-Start to the model • See page 22
Learn the proper way to use the EZ-Start electric starting system
13. Start the engine • See page 23
Learn to use the correct starting procedure for your TRX 3.3.
14. Break-in your engine • See pages 23-25
Follow the break-in instructions exactly to ensure the
best-performing, longest-lasting engine.
15. Tune your engine • See page 25
Learn how to set the fuel mixture needles for optimum
engine performance.
16. Drive your Nitro Slash • See page 28
Driving tips and adjustments for your Nitro Slash.
17. Maintaining your model • See page 30
Follow these critical steps to maintain the performance of your
Nitro Slash and keep it in excellent running condition.
The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your Nitro Slash.
Look for the Quick Start
logo at the bottom of
Quick Start pages.
NITRO SLASH • 7
Advertisement
