Advertisement
TOOLS, SUPPLIES, AND REQUIRED EQUIPMENT
Your Nitro Slash comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to
operate and maintain your model.
SUPPLIED TOOLS AND EQUIPMENT
Turnbuckle wrench
1.5mm "L" wrench
2.5mm "L" wrench
NiMH 7.2V
NiMH battery charger*
battery pack*
REQUIRED TOOLS AND EQUIPMENT
10% quart - #5010
20% quart - #5020
33% quart - #5030
10% gallon - #5060
20% gallon - #5070
33% gallon - #5080
Traxxas Top Fuel
™
8 AA alkaline batteries
see page 18
4-way wrench
U-joint wrench
Various pre-load spacers and shock
pistons (on parts tree) see page 29
Fuel dispensing bottle
(sold separately)
After-run oil to protect
the engine from corrosion
Glow plug and
wheel nut wrench
Body clips and
body washers
Small flat-blade screwdriver
for tuning (1/8 inch blade)
*Battery and charger style are subject to change and may vary from images.
For more information on radio
system batteries, see Use the
Right Batteries on page 10.
Recommended Equipment
These items are not required
Extra
for the operation of your
glow plug
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
Foam air filter oil
• Side cutters and/or needle
see page 19
nose pliers
• Philips screwdriver
• Soldering iron
NITRO SLASH • 5
Advertisement
