Scanning Cds And Tracks; Selecting Tracks From The Track Title List; Selecting Discs From The Disc Title List - Pioneer FH-P9200MP Operation Manual

Section
08 Multi-CD Player
Note
When the random mode is exited while random
play is on, RDM appears on the basic display.

Scanning CDs and tracks

While you are using Disc repeat, the begin-
ning of each track on the selected disc plays
for about 10 seconds. When you are using
Magazine repeat, the beginning of the first
track of each disc is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNC and then press SCAN to se-
lect the scan mode.
3 Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track of the current disc (or the first track
of each disc) is played.
4 When you find the desired track (or
disc) press SCAN to turn scan play off.
The light goes off. The track (or disc) will con-
tinue to play.
# If the scan mode is automatically canceled,
select the scan mode again.
Notes
! After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
! When the scan mode is exited while scan play
is on, SCAN appears on the basic display.
34
En
Selecting tracks from the
track title list
The track title list lets you see the list of track
titles on a CD TEXT disc and select one of
them for playback.
1 Press FUNC and then press T.LIST to se-
lect the track title list mode.
2 Press NEXT to display the desired track
title.
Press NEXT until the desired track title ap-
pears.
3 Press the corresponding number button
to select the desired track title.
That selection will begin to play.
Notes
! You can also use c, d and a to select and
play the desired track title.
! Only when playing a CD TEXT disc on a CD
TEXT compatible multi-CD player, you can
switch to this mode.
Selecting discs from the
disc title list
Disc title list lets you see the list of disc titles
that have been entered into the multi-CD
player and select one of them to playback.
1 Press FUNC and then press D.LIST to se-
lect the disc title list mode.