Tuner; Listening To The Radio; Introduction Of Advanced Tuner Operation - Pioneer FH-P9200MP Operation Manual

Section
04

Tuner

Listening to the radio

1
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on this page.
Important
If you are using this unit in North, Central or
South America, reset the AM tuning step (see
Setting the AM tuning step on page 58).
1 Band indicator
Shows which band the radio is tuned to, AM
or FM.
2 LOC indicator
Shows when local seek tuning is on.
3 Preset number indicator
Shows what preset has been selected.
4 Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
5 Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Rotate SOURCE to select the tuner.
Rotate SOURCE until you see Tuner displayed.
16
En
3 4
2
5
FORM1
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, FM-1, FM-2, FM-3 for FM or AM.
4 To perform manual tuning, press c or
d with quick presses.
The frequencies move up or down step by
step.
5 To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by pressing either
c or d with a quick press.
# If you press and hold c or d you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Introduction of advanced
tuner operation
The tuner function menu has the following
functions:
BSM (best stations memory)chLIST (chan-
nel list)LOC (local seek tuning)
Note
If you do not operate the function within about 30
seconds, the display is automatically returned.