Switching Computer Function - Cateye CC-MC200W User Manual

Operating the computer [Measuring screen]
Sensor signal icon
Flashes in synch with a sensor signal.
Pace arrow
Indicates whether the current speed
is faster ( ) or slower ( ) than the
average speed.
Clock display

Switching computer function

Pressing the MODE button switches the measurement data at the bottom in the order shown in the following figure.
Elapsed Time
0:00'00" – 9:59'59"
MODE
MODE
Stop watch (*2)
0:00'00 - 9:59'59"
MODE
Total Distance
0 – 99999 km[mile]
MODE
*1 When Tm about 10 hours, or Dst exceeds 999.99 km, .E will appear.
Reset the data.
*2 It appears only in the auto mode.
Current speed
0.0 ( :4.0 / :3.0) – 105.9 km/h
[0.0 ( :3.0 / :2.0) – 65.0 mph]
* "Spd" icon is displayed when display-
ing current speed at the bottom.
Speed unit
Tire size icon
Auto mode icon
Trip Distance Trip Distance-2
0.00 – 999.99 km [mile] 0.00 – 999.99 km [mile]
MODE
Maximum Speed Average Speed (*1)
0.0 – 105.9 km/h 0.0 – 105.9 km/h
MODE
[0.0 – 65.0 mph] [0.0 – 65.0 mph]
MODE operation when
the computer is mount-
ed on the bracket
MODE
Click
SSE + MODE
Click
SSE
MODE
CC-MC200W
Starting / Stopping measurement
There are two measurement methods; manual mode and auto mode.
See "Changing the computer settings: Selecting the auto
Setting
method
mode" (Page 7).
The speed unit (km/h or mph) flashes during measurement.
* The maximum speed and total distance are updated regardless of start/
stop of the measurement.
• Auto mode ( illuminated)
Measurements start automatically when the bicycle is
in motion.
START STOP
• Manual mode
Press the SSE button together with the unit to start/
stop the measurement.
Starting/Stopping measurement
SSE + MODE
* When the computer is removed from the bracket, press the SSE
button on the front and the MODE button on the back simultane-
ously.
Resetting data
Pressing and holding SSE together with the unit on the
measurement screen resets any measurement data, ex-
cept the total distance (Odo), trip distance-2 (Dst2), and
stopwatch ( ).
* The total distance (ODO) is not reset.
• Resetting separately the trip distance-2 and stop watch
To reset the currently displayed data, display trip distance 2 (Dst2) or
the stopwatch( ), and hold down the main unit along with the SSE.
* How to reset the trip distance 2 (Dst2) and the
stopwatch displayed in top row of screen
Display the current speed (Spd) in bottom row of
screen and perform the reset operation.
ENG 4
ON
OFF
SSE + MODE
(Press & hold)