Making A Call Through The Contact List; Mute/Unmute A Call - Zte Memo User Manual

The second set of numbers is dialed
automatically after the pause. This
feature is useful for dialing systems
that require a code.
1. To insert a wait/pause, enter a phone
number then press the Right Soft Key
Options. Select either a Type 'P' ("P"
appears) or a Type 'T' ("T" appears).
note
• Type 'P': A hard pause stops the
calling sequence until further input
from you.
• Type 'T': A pause stopping the
calling sequence for two seconds
and then automatically sends the
remaining digits.
2. Press the SEND Key to dial or Left
Soft Key Save to save the number.
3-way calling
With 3-Way Calling, you can talk to
two people at the same time.
1. Enter a number you wish to call
then press the SEND Key.
2. Once you have established the
Basic operation
10
connection, enter the second
number you wish to call then press
the SEND Key.
3. When you're connected to the
second party, press the SEND Key
again to begin your 3-Way call.
3-way calling is a system
note
dependent feature. Please contact
your service provider for details.
Caller ID function
Identifies caller by displaying their
phone number. If the caller's name
and number are stored in the phone
book, their name will appear. This is
a system dependent feature. Please
contact your service provider for
details.
Call waiting function
Notifies you of an incoming call when
you are already on a call by sounding
a beep tone and displaying the
caller's phone number.
1. To answer another call while on the
phone, press the SEND Key. This
places the first call on hold.
To switch back to the first caller,
press the SEND Key again.
Call Waiting is a system
note
dependent feature. Please contact
your service provider for details.
Adjusting volume
1. During a call, press Side Volume
Scroll Key up or down to adjust the
earpiece volume.
Making a call through the contact
list
One-touch/two-touch dialing
Ideal for frequently dialed numbers,
this feature allows entries in your
contact list to be dialed via the
keypad with only one or two key
presses. In order for One-Touch/
Two-Touch Dialing to properly work, it
must be enabled.
One-touch dialing
2-9: Press and hold the corresponding
memory number for more than 1 second.
Two-touch dialing
10-99: Enter the first digit and press
and hold the second digit for more
than 1 second.
note
• If no phone number is stored in the
location entered, "Speed dial is
empty" will appear on the screen.
• If One Touch Dial is set to Off: Enter
the speed dial location number then
press the SEND Key.
• Location 1 is reserved for voicemail.
Location 2-99 are unassigned.
To assign a speed dial location,
please see page 20.

Mute/Unmute a call

1. During a call, press the Left Soft
Key Mute.
• Mute (Unmute): If you press
Mute during a call, the person
you are speaking with cannot
hear you or any sounds from
your side of the conversation.
However, you can still hear them.
Basic operation
11