Table of Contents
Advertisement
Note on CD-R/RW discs
- Because of non-standardized format definition/ production of CD-R/RW, playback quality and performance are not
guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions, such as PC performance,
writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- It is recommended to record only audio files on CD-R/RW discs for easy reading.
PROGRAMMED PLAYBACK
PROGRAMMED PLAYBACK
FOR NORMAL COMPACT DISC PLAYBACK
Programmed playback enables tracks on a disc to be
played in the desired order. Up to 20 tracks can be
programmed.
1. Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select
the desired track number.
3. Press the " PROGRAM " button again to memorize
the track.
4. Repeat steps 2 and 3 until all desired tracks are
programmed.
5. Press the " PLAY/PAUSE " button to start.
"
" , " PROG " & track number are shown on the
CD display.
6.
Press the " STOP " button once to stop programmed
playback.
7.
Press the " PLAY/PAUSE " button to resume
programmed playback.
8.
Open the CD door, turn off the CD player or press the
" STOP " button twice to clear the programmed
memory.
Note : Programming can only be made when the player
is in stop mode.
TAPE PLAYBACK
1 .
Set to TAPE
2 .
Insert the cassette.
CD30MP3 LENCO SCR-98MP3 ENG TCD17 7
CD display
" PROGRAM "
FUNCTION
TAPE
FOR MP3 / WMA PLAYBACK
Programmed playback enables folders/albums or tracks on a
disc to be played in the desired order. Up to 20 folders/albums
or tracks can be programmed.
1.
Press the " PROGRAM " button.
2. Press the " NEXT " and " BACK " buttons to select
the desired track number.
3. Press the " PROGRAM " button again to memorize
the track.
4.
Repeat steps 2 and 3 until all desired folders or
tracks are programmed.
5.
Press the " PLAY/PAUSE " button to start.
"
" , " PROG " and " MP3 / WMA " & track
number are shown on the CD display.
6.
Press the " STOP " button once to stop programmed
playback.
7.
Press the " PLAY/PAUSE " button to resume
programmed playback.
8.
Open the CD door, turn off the CD player or press the
" STOP " button twice to clear the programmed
memory.
Note : Programming can only be made when the player
is in stop mode.
3 .
Press the
PLAY button.
TO STOP PLAYBACK
Press the STOP / EJECT button.
TO INTERRUPT PLAYBACK
Press the PAUSE button.
To resume play, press the PAUSE button again.
TO FAST WIND
Press the REWIND or F.FWD button. Press the STOP/
EJECT button to stop winding at the desired position.
GB 5
MP3 / WMA display
" PROGRAM "
PLAY
5/4/2013 10:56:42
Advertisement
Table of Contents
