Table of Contents
Advertisement
RADIO MEMORY FUNCTION
1.
Tune to a desired radio station.
2.
Press RANDOM / P - / PROGRAM / MEMORY button ( 2 seconds ) to enter tuning saving mode.
The "MEMORY" icon will be turned on.
3.
Program number "01" on the left hand side will be flashing.
4.
Within 10 seconds, press PLAY MODE / P+ or RANDOM / P - / PROGRAM / MEMORY
button to select the desired program number.
5.
Press ENTER / PLAY/PAUSE button to confirm the Program number.
6.
Press RANDOM / P - / PROGRAM / MEMORY button ( 2 seconds ) to confirm the memory.
7.
If there is no button pressed within 10 seconds, it will exit tuning save mode and the
"MEMORY" icon will be turned off.
COMPACT DISC PLAYBACK
1.
Press FUNCTION button
repeatedly until "CD" is
shown on display.
3.
Insert a disc with the label side facing up.
4.
Close the CD door, the disc will rotate.
For CD : The total tracks of the disc will show on the
display.
For MP3/WMA/USB : The total tracks of the disc and total
TO INTERRUPT PLAYBACK
Press the ENTER / PLAY/PAUSE
button to resume playback.
For CD : Track number "001" & "CD" will be shown, the
time of the track "00:00" in flash, during normal
compact disc playback.
For MP3 : Track number "F01" & "MP3" will be shown,
the time of the track "00:00" in flash, during
MP3 playback.
For WMA : Track number "F01" & "WMA" will be shown,
the time of the track "00:00" in flash, during
WMA playback.
For USB : Track number "F01" & "USB" will be shown,
the time of the track "00:00" in flash, during
USB playback.
CD display
WMA display
TO SKIP TO THE BEGINNING OF A TRACK
•
Press either one of the skip buttons according to the desired skip direction.
•
Play/back resumes from the selected track.
•
When the button is pressed once during play, the previous track starts again.
•
When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
•
Keep the or button pressed during playback, and release the button as soon as you
recognise the desired passage. Then normal CD playback will resume from this point.
PLAYING TRACKS IN RANDOM ORDERS
1. If the RANDOM / P - / PROGRAM / MEMORY button is pressed, the tracks on the discs are not played
RANDOM / P - / PROGRAM / MEMORY button is pressed, the tracks on the discs are not played
in consecutive order but in random order. The word RAND appears on the display to provide a visual
reminder that the RAND function has been activated.
2. Press the STOP button or RANDOM / P - / PROGRAM / MEMORY button to switch off the function RAND.
SCR186-AMFM ENG-MP3-WMA-USB-LENC5 5
number of the folder will show on
the display.
button. Press the
MP3 display
USB display
RANDOM / P - / PROGRAM / MEMORY button to switch off the function RAND.
2.
Lift the CD door up.
CD display
5.
After disc read finished, the disc will play automatically.
In stop mode, press the ENTER / PLAY/PAUSE
button to play the track.
For CD : Track number "001" & "CD" & "00:00" will be
shown, during normal compact disc playback.
For MP3 : Track number "F01" & "MP3" & "00:00" will
be shown, during MP3 playback.
For WMA : Track number "F01" & "WMA" & "00:00" will
be shown, during WMA playback.
For USB : Track number "F01" & "USB" & "00:00" will
be shown, during USB playback.
CD display
WMA display
TO STOP PLAYBACK
Press the STOP button.
For CD : Total number of tracks and time will be shown.
For MP3 : Total number of tracks and folder will be shown.
For WMA : Total number of tracks and folder will be shown.
For USB : Total number of tracks and folder will be shown.
is pressed, the tracks on the discs are not played
to switch off the function RAND.
E 3
MP3 display
USB display
7/7/2006 5:53:10 PM
Hide quick links:
Advertisement
Table of Contents
