Burner - Monessen Hearth VWF18 Installation And Operating Instructions Manual

MAKE SURE YOU HAVE RECEIVED ALL PARTS:
Check your packing list to verify that all listed parts have been received. You should have the following:
BURNER - GRATE ASSEMBLY 18, 24, 30, 36"
• Burner and Grate Weldment Assembly
• Glowing Embers (Rock Wool)
• Installation /Operating Instructions
• Control Cover
18", 24", 30" OR 36" CERAMIC FIBER OR REFRACTORY LOGS
• Individual Logs
Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately inform the
dealer from whom you purchased the appliance. Do not attempt to install any part of the appliance unless you
have all parts in good condition.
ITEMS REQUIRED FOR INSTALLATION
Ensure that the following items are available before proceeding with installation:
• External regulator (for propane/L.P.G. only)
• Piping which complies with local codes
• Pipe sealant approved for use with propane/L.P.G. (Resistant to sulfur compounds)
MINIMUM OPENING AREA OF CHIMNEY DAMPER FOR VENTING
MINIMUM CHIMNEY HEIGHT AND FLUE OPENING
27D8520
• Lava Rocks (x2)
• Damper Clamp
3
• / " Aluminum tube with
8
• Shield Plate
• Installation Instructions
• Shutoff valve
• Pipe wrench
CHIMNEY HEIGHT FLUE OPENING
GETTING STARTED
• Extenders with Knob (Manual Control Only)
• Vermiculite
3 1
/ " 90° elbow, / " to
8 2
3
/ "
8