Slide Shield Plate Down Back Of Burner Pan. See Figure; Burner; Two Front Logs - Monessen Hearth VWF18 Installation And Operating Instructions Manual

LOG PLACEMENT
FILLING THE BURNER PAN
Fill the burner pan with vermiculite to the bottom of the rear log and sloped to the front edge of the burner pan. Excess ver-
or MVVK is installed) with vermiculite or rock wool (embers).
installing rear (#1) and front logs (#2 and #3), cover the entire top surface of the vermiculite in the burner pan with the rock
1
wool supplied with unit. Tear the rock wool into pieces approximately / " in size (roughly the size of a nickel) and cover
2
the burner evenly. Do no use more rock wool than the amount supplied with the unit. To enhance the appearance of the
the two front logs.
PLACEMENT OF DECORATIVE VOLCANIC ROCK
Sprinkle volcanic rock in front of front glowing embers and to both sides.
DO NOT SPRINKLE ON BURNERS, EMBER BED, PILOT OR LOGS.
VWF18 MASSIVE OAK LOGS

1.Slide shield plate down back of burner pan. See Figure 12.

See Figure 13.

Burner

Continued
27D8520