Tools, Supplies And Required Equipment - Traxxas Slayer Pro 4WD 5908 Owner's Manual

Tools, Supplies and Required Equipment

Your Slayer comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate and maintain your model.
SUPPlIED ToolS AnD EQUIPMEnT
Shock wrench 8mm slipper clutch wrench
Glow plug
1.5mm "L" wrench
wrench
Extra oiled air filter set
(pre-filter and primary filter)
REQUIRED ToolS AnD EQUIPMEnT
10% quart - #5010
20% quart - #5020
33% quart - #5030
10% gallon - #5060
20% gallon - #5070
33% gallon - #5080
Traxxas Top Fuel® Power Plus
™
see page 20
After-run oil to protect
the engine from corrosion
Turnbuckle wrench
2.0mm "T" wrench
Suspension tuning
shims and hollow balls
(sold separately)
12 AA alkaline batteries
Small flat-blade screwdriver
for tuning (1/8 inch blade)
Suspension multi-tool 4-way wrench
2.5mm "L" wrench
NiCad or NiMH NiCad or NiMH battery charger
7.2V battery pack
Traxxas part #3030X shown
Air filter oil Fuel dispensing bottle
Traxxas part #5263
(Traxxas part #5001)
For more information on radio
system batteries, see Use the
Right Batteries on page 11.
Recommended Equipment
These items are not required
Antenna nut
wrench
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
2.5mm "T" wrench
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
Slayer • 5