Burner Assembly; Removing The Burner Assembly; Warming Rack - Dyna-Glo DGP480CSP User's Manual And Operating Instructions

1. Make sure all control knobs
are in the OFF position, LP tank
valve is closed, and the tank is
disconnected from regulator and
removed from grill.
2. Open lid and remove warming
rack, cooking grates, and heater
tents.
3. Remove the 4 cotter pins holding
main burners in place.
Cotter pins
4. Disconnect center burner electrode
as shown.
5. Slide center burner out of firebox as
shown.
22

Warming Rack

Cooking
Grates
Heat Tents