General Safety Precautions - Jonsered 2033T Operator's Manual

!
Warning! Tree maintenance work with a
chainsaw above ground level, in which
working one-handed can occur, should only
be carried out by specially trained persons.

GENERAL SAFETY PRECAUTIONS

1 Chain saws are designed solely for cutting wood. The only
cutting equipment that can be used with this chain saw are
the combinations of bars and chains recommended in the
"Technical data" section.
2 Never use a chain saw if
you are tired, if you have
drunk alcohol, or if you
are taking medication that
affects your vision, your
judgement or your co-
ordination.
3 Tree maintenance work
with a chainsaw above
ground level, in which
working one-handed can
occur, should only be
carried out by persons
with experience of and
training in:
• tree maintenance
• climbing techniques
• safety instructions for
climbing
• extra safety
equipment, such as
harnesses, loops,
straps, ropes, safety
hooks and other anti-fall
measures
for both the chain saw
and operator.
4 Always wear suitable protective clothing. See the section
on "Personal protective equipment" .
5 Never use a chain saw that has been modified in any way
from its original specification.
6 Never use a chain saw
that is faulty. Carry out
the regular checks,
maintenance and service
routines described in this
manual. Some
maintenance and service
measures must be carried
out by trained specialists.
See the section on
"Maintenance" .
18
– English
SAFETY INSTRUCTIONS
7 STARTING
!
Warning!
Never start the saw without first activating
the chain brake!
!
Prolonged inhalation of exhaust gases from
the engine, chain lubrication oil mist and/or
saw dust can be unhealthy.
• Never start a chain saw
unless the bar, chain and
clutch cover are fitted
correctly. (See section on
"Assembly" ).
• Never start a chain saw
indoors. Exhaust fumes can
be dangerous.
• Before starting the saw
make sure there are no
people or animals nearby
who might be put at risk.
• Place the chain saw on the
ground with your right knee
on the rear handle. Activate
the chain brake by pushing
the front hand guard
forward. Grasp the front
handle firmly using your left
hand. Make sure the chain
saw is steady and the chain
is not touching the ground.
Then grasp the starter
handle and pull the starter
cord.
STOP