Selecting The Video Input Source/On-Screen Language Selection - Toshiba 32DV700A Owner's Manual

Selecting the video input source/On-screen
language selection
Note:
• Menu languages
supported are English,
French, Spanish, and
Italian.
• If no button is pressed
after approximately 5
seconds, the Source
Selection menu screen
disappears.
16
Selecting the video input source
Press INPUT
1
to view a signal from the device connected to your TV, such as a VCR or
DVD player.
You can select each input source according to the devices you have connected to your TV.
/
2 Press or the corresponding number on the screen to select a video input source, and
then press ENTER/CH LIST
ATV
DTV
AV
Component
HDMI1
HDMI2
PC
On-screen language selection
Preparation:
Press TV/DVD
to select TV mode.
Press ATV/DTV
to toggle between analog TV and digital TV mode.
Press MENU SETUP
1
/
to select Setup, and then press ENTER/CH LIST
2
Press
/
to select Language Setup (unless it
3
Press
has already been selected when the TV was first
turned on), and then press ENTER/CH LIST
/
to select Menu Language, and then
4
Press
press to display the language menu.
/
to select your desired language, and then press ENTER/CH LIST
5 Press
Press EXIT/CANCEL
6
within 5 seconds.
or DIGITAL MENU
to display the Main Menu screen.
.
to return to the normal screen.
DTV
AV
Component
HDMI1
HDMI2
PC
.
REGZA-LINK Setup >>
REGZA-LINK Player >>
Media Player >>
Language Setup
>>
Timer Setting
>>
Password Setup >>
Language Setup
Menu Language English
Pref. Audio Language English
Pref. Subtitle Language English
Pref. Digital Service Language English
.