Horizon Fitness Endurance 4 Owner's Manual page 8

ENDURANCE 4 ASSEMBLY STEP 2
ENDURANCE 4 SHoWN
ENDURANCE 4
ONLY
NUTS (G)
SPRING WASHERS (F)
FLAT WASHERS (E)
GUIDE RAIL SET
BOLTS (J)
SPRING WASHERS (I)
FLAT WASHERS (H)
MANUAL INCLINE
LIFT LEVER
GUIDE RAIL SET
8
MANUAL INCLINE
LIFT LEVER
* This step is for ENdURANCE 4 only.
BOLTS (D)
A
B
C
d
E
MAIN FRAME
HARDWARE foR STEP 2
BOLT (D) FLAT WASHER (E) SPRING WASHER (F)
35 mm 16 mm 15 mm
Qty: 4 Qty: 4 Qty: 4
FLAT WASHER (H) SPRING WASHER (I)
20 mm 18 mm
Qty: 4 Qty: 4
Open hardware for step 2.
Attach manual incline lift lever to guide
rail set using 4 bolts (d), 4 flat washers
(e), 4 spring washers (f) and 4 nuts (g).
Align guide rail set with main frame as
shown.
Lift up on the manual incline lift lever
and place it in one of the holes inside the main
frame.
Attach the guide rail set to the main frame
using 4 bolts (J), 4 flat washers (h) and 4
spring washers (i).
NUT (G)
Qty: 4
BOLT (J)
25 mm
Qty: 4