Impex POWERHOUSE ELITE PHE 2000 Owner's Manual page 22

STEP 10 (See Diagram 10 & Butterfly Cable Loop Diagram)
A.) Attach one end of the 87" Butterfly Cable (#35) to the open slot on Right Butterfly (#20).
B.) Draw the Cable to the open slot on the Butterfly Pulley Bracket (#17). Attach a Pulley to
the open slot. Secure the Pulley with one M10 x 1 ¾" Allen Bolt (#80), one L-shape
Cable Bracket (#91), two
C.) Draw the Cable underneath the Pulley then upward to the Angled Double Floating Pulley
Bracket (#23) previously installed in STEP-9. Install a Pulley.
D.) Draw the Cable around the Pulley then downward to the left open slot on the Butterfly
Pulley Bracket. Repeat the Procedure B above to install a Pulley.
E.) Pull the Cable ant attach it to the open slot on the Left Butterfly (#19).
¾" Washers (#87), and one M10 Aircraft Nut (#89).
21
DIAGRAM 10