Table of Contents
Advertisement
STEP 7 (See Diagram 7)
A.) Place the Seat Pad (#21) onto the Seat Post (#9). Secure it with two M8 x 1 5/8" Allen Bolts
(#82) and
5/8" Washers (#86).
B.) Insert the Seat Post into the opening on the Seat Support Frame (#6). Use a Lock Knob
(#44) to obtain the desired height of Seat.
C.) Insert two Foam Tubes (#28) halfway through the holes on Seat Post and Leg Developer.
Push four Foam Rolls (#64) onto the Tubes from both ends. Plug four Foam Roll End Caps
(#58) onto the Tubes.
13
DIAGRAM 7
Hide quick links:
Advertisement
Table of Contents
