Samsung SGH-x426 User Manual page 106

Homepage URL: set the address of your startup
homepage. When the default homepage displays,
delete it using
Security: set the data transmission mode. Select
Secure to protect your data against unauthorized
access; otherwise, choose Non-Secure.
IP Address: enter the WAP gateway address required
to connect to the Internet.
Bearer: select the bearer to be used for each type of
network address accessed: GPRS or Data. The
remaining options depend on the Bearer setting.
When the bearer is set to GPRS
♦
User Name: enter the User ID required to connect to the GPRS
network.
♦
Password: enter the password required to connect to the GPRS
network.
♦
APN: enter the access point name used for the address of the
GPRS network gateway.
♦
When the bearer is set to Data
♦
Login Name: enter the PPP server login ID.
♦
Password: enter the PPP server password.
♦
Dial-up Number: enter the PPP server phone number.
♦
Data Call Type: select a data call type from Analog or ISDN.
Note:
The WAP Browser settings may vary, depending on the service provider.
Contact your service provider for further information.
Clear Cache
You can clear the information stored in the cache,
which stores the most recently accessed Web pages.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
Funbox
102
and enter your own selection.
(Menu 7.1.3)