LENCO DC-1041 Manual

DC-1041 Manual
IMPORTANT
- Don't open the battery door under water.
- Close the battery door properly for best water sealing.
- Rinse the camera with clean water after used and keep it dry for
storage.

1. Getting to know your camera

8.0 Mega pixels resolution sensor
Digital still camera
Digital video camcorder
Built-in flash light
4x digital zoom
2.7+1.8 " TFT color display
MicroSD card support
2 x AAA alkaline batteries
2. Functional parts
Press this button to take photographs or to start /stop recording
1 Shutter
a video clip, or to confirm changes in menu mode
Power on/off Press this button to switch on and press it for at least 2 seconds
2
button to shut off, or press it to display or hide the status icon on LCD.
LCD switch Press this button to switch LCD between the small monitor and
3
button the big monitor.
4 Strap hook Hook for attaching the wrist strap to the camera.
Use the built-in flash to give the subject extra lighting if it is in dark
5 Flash light surroundings（the best flash distance is recommended within
1.5m).
Records the image to be taken.
6 Lens Note: Keep the lens clean. Dirt and fingerprints will affect the
quality of the picture.
7 Busy indicator When the indicator is blinking, the camera is busy.
8 Small monitor Use the small monitor to take photos of yourself
Macro mode: Select this mode to take close-up
photographs (distance 11cm - 18cm).
Macro/normal
9
Normal mode: Select this mode to take photographs from
switch
0.5m - infinity.
10 LCD screen Display photographs, video clips, camera setting and menu.
In Preview mode: press this button to Tele (zoom in);
In Menu mode: press this button to up the selection bar.
11 Up/Tele In Playback mode（photo）: press this button to zoom in.
In playback (Video playing) mode: press it to start/pause the
video.
In Preview mode: press this button to Wide (zoom out);
In Menu mode: press this button to down the selection bar.
12 Down/Wide In Playback mode（photo）: press this button to zoom out.
In Playback mode: press this button to get into the thumbnail
mode
In Menu mode: press this button for the left selection;
In Playback mode: press this button to the previous one;
In Photo infinite Preview mode:
Left / Flash press this button to switch Flash modes; (the flash light cannot be
13
light used in macro mode）
In Photo (zoom in) Playback mode: press it to move to the left
area of the photo.
In playback (Video playing) mode: press it to fast rewind.
Press this button to get into Playback mode;
In Playback mode: press this button to the next one;
Right / In Menu mode: press this button for the right selection;
14
Playback In Photo (zoom in) Playback mode: press it to move to the right
area of the photo.
In playback (Video playing) mode: press it to fast forward.
Press this button to switch between movie and still capture mode;
In Playback mode: press this button to exit.
15 Mode Switch In Photo (zoom in) Playback mode: press it to move to the up
area of the photo. In playback (Video playing) mode: press it to
stop the video.
In Preview mode: press it to enter the settings Menus.
In Playback mode:
Press it for a short time to enter "Delete single/ all files" mode;
16 Menu / Delete
Press it for a long time to enter file compiling and system setting
menu. In Photo (zoom in) Playback mode: press it to move to the
down area of the photo.
Tripod
17 To fix the camera on the tripod.
connector
Via this connection, you can download photographs and video
18 USB interface
clips to a computer.
MicroSD card
19 MicroSD card storage location.
slot
Battery
20 Compartment for 2 x AAA alkaline batteries
compartment
3. Explanation of the status icons
Item Function
Photographs mode.
1
Mode selected
Videos mode.
Force flash: The flash is on in any
environment.
Auto flash: The camera determines if
2 Flash indicator
the flash should be used or not.
No flash: The flash is turned off.
Mode (0.5m – infinity).
Normal/Macro
3
Macro mode (11cm – 18cm).
mode indicator
4 Self-timer Shows selected Self-timer setting
16M = 4608x3456; 8M = 3264x2448;
5
Selected resolution 5M = 2592x1944;
VGA = 640x480
Super fine.
6 Picture quality Fine.
Normal.
The batteries are full.
7 Battery indicator
The batteries are empty.
Zoom indicator
8
Shows the zoom ratio in preview mode
The MicroSD card is inserted and will be
The MicroSD card
9
used as storage for PHOTO and VIDEO
indication
10 White Balance Shows selected White-balance mode.
Photo mode: No. of pictures that can be taken.
11
Photo/Video counter
Video mode: Recording time in seconds.
4. Details for camera setting
Description
Note: The camera will remain the last setting when it is turned off.

5. Using the camera

5.1 Installing the batteries
1. Open the battery door.
3M = 2048x1536;
2. Insert 2 x AAA alkaline batteries into the camera.
3. Close the battery door.
5.2 Inserting a memory card (not included)
This camera has no built-in internal memory. The memory can be gained with a MicroSD memory
card (not included).
Follow the instructions below to insert the optional MicroSD memory card into the camera.
1. Turn off the camera first.
16M pixel resolution 4608x3456
8.0M pixel resolution
3264x2448
Resolution
5.0M pixel resolution 2592x1944
3.0M pixel resolution 2048 x 1536
VGA resolution 640 x 480
Quality Super Fine/Fine/Normal Picture quality setting
Metering Center/Multi/Spot Metering setting
Auto Automatic white balance
White balance selected for
Daylight
daylight surrounding
White balance selected for
Cloudy
White Balance cloudy surrounding
White balance selected for
Tungsten
tungsten lighting
White balance selected for
Fluorescent
fluorescent surrounding
ISO Auto/100/200/400/800 Sensitivity selection
±2.0, ±5/3, ±4/3, ±
Exposure Exposure setting
1.0, ±2/3, ±1/3, 0
Self Timer On/Off Self timer setting
Sharpness Hard/ Normal/ Soft Sharpness setting
Normal/ B&W/ Sepia/
Negative/ Lomo/ Pencil
Effect Effect setting
Sketch/ Red/ Green/
Blue/ Vivid
Date Stamp On/ Off Date stamp setting
Quick View On/ Off Quick view setting
VGA 640 x 480
Movie Size Video resolution setting
QVGA 320 x 240
Auto Automatic white balance
White balance selected for
Daylight
daylight surrounding
White balance selected for
Cloudy
White balance cloudy surrounding
White balance selected for
Tungsten
tungsten lighting
White balance selected for
Fluorescent
fluorescent surrounding
Sounds Off/On Sounds setting
Select power frequency in
Frequency 50Hz / 60Hz
your location
Power Save Off / 1Minute / 3 Minutes Auto power off selection
English/ French/
Language Display language selection
Deutsch/Italian/Spanish/
Portuguese/Japanese
Date/Time YY/MM/DD Date or time setting
Format the memory location
Format Yes/No
selection.
Reset All Yes/No Reset all setting
Version See the firmware version