Canon ZR500 Instruction Manual page 73

Hide thumbs Also See for ZR500:
Table of Contents

Advertisement

About the battery terminal cover
The battery terminal cover has a [ 0 ]-shaped hole. This is useful when you wish to
differentiate between charged and uncharged battery packs. For example, with charged
~E
battery packs, attach the terminal cover so that the ( 0 ]-shaped hole shows the blue
L--=.J
label.
Back side of the
battery pack
Terminal cover attached
Charged
Uncharged
DC]
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mishandled. Do not recharge, disassemble, heat above 100°C (212 OF) or incinerate
the battery.
• Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony,
Toshiba, Varta or Renata. Use of other batteries may present a risk of fire or
explosion.
o
Do not pick up the battery using tweezers or other metal tools as this will cause a short
circuit.
o
Wipe the battery with a clean dry cloth to ensure proper contact.
o
Keep the battery out of reach of children. If it is swallowed, seek medical assistance
immediately. The battery case may break and the battery fluids may damage stomach
and intestines.
o
Do not disassemble, heat or immerse the battery in water to avoid the risk of explosion .
.
C a.$$.~.tt~
. . . .
H .aD.dJ.~.ng:
. . .
e.r~.ca.Y.tiQn$
o
Rewind tapes after use. If the tape becomes slack and damaged, it may cause picture
and sound distortion.
o
Return cassettes in the case and store them upright.
o
Do not leave the cassette in the camcorder after use.
o
Do not use spliced tapes or nonstandard cassettes as they may damage the
camcorder.
o
Do not use tapes that have been jammed as video heads may become dirty.
o
Do not insert anything into the small holes of the cassette, or cover them with
cellophane tape.
o
Handle cassettes with care. Do not drop or subject them to severe impact as this may
damage the cassettes.
o
Rewind tapes from time to time if they are stored for a long time.
o
With cassettes equipped with a memory function, metal plated terminals may become
dirty with use. Clean the terminals with a cotton swab after about 10 times of loading/
unloading. The memory function is not supported by the camcorder.
-
[ 6:
o
0.
3
a;
nl
0
-~
-- nl
o _
~
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents