Canon ZR500 Instruction Manual page 61

The image stabilizer compensates for camcorder shake even at full telephoto. It tries to
compensate for horizontal movements; therefore, you may decide to turn it off when you
I;;-)E
mount the camcorder on a tripod.
L=--.J
ICAIVIEIIAeIQ§ll . . . " , . " , . , . " . " . " . " . , . " . , . " , . " """"""", ' " """""""""""""""""". . "
'i
~~~
I
r~ I~~
CAMERA SETUP H,--I_MG_ST_A_B _O_N_---,- _
1. Open the FUNC. menu, select (.T) the
n~
icon and press (@).
2. Select (.T) the [CAMERA SETUP] menu and press (@). Then, select
(.T) the [IMG STAB] option and press (@).
3. Set it to [OFF] and press (®) to save the changes, then close the
menu.
"((Ill) "
disappears.
o
The image stabilizer cannot be turned off when the program selector is set to
1l.§1.
o
The image stabilizer is designed to compensate a normal degree of camcorder
shake.
o
The image stabilizer might not be as effective when using the
PJ
Night
recording program.
c;,b;a,Dgii"IJ.;gx;,;lb,,~,;,);Dcls;g;l;aiMi;Q,fxitbe,;,;Sla,r10;LJ;g;i'ilima.g;~.
You can set whether the Canon logo will be displayed or not when you turn on the
camcorder.
I
CAMERA e@§] ) ( PLAYe@§]
MENU
(Q]33)
I
r~ I~[!!]
SYSTEM SETUP
I~I
START· UP IMG ON
To turn off the start-up image:
1. Open the FUNC. menu, select (.T) the
T13
icon and press (@).
2. Select (.T) the [SYSTEM SETUP] menu and press (@). Then, select
(.T) the [START-UP IMG] option and press (@).
3. Set it to [OFF] and press (@) to save the changes, then close the
menu.
61