Audio Recording - Canon ZR500 Instruction Manual

Audio Recording
You can record sound in two audio modes-16-bit and 12-bit. The 12-bit mode records
sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new
sound later with another editing device. Select the 16-bit mode for higher sound quality.
(P~NI§rtR·@g]>~ lI!R!..t~1
~~~) i n~ I~~
AUDIO SETUP
It!
AUDIO MODE 12bit
1. Open the FUNC. menu, select (.... ) the
r~
icon and press
(~).
2. Select (.... ) the [AUDIO SETUP] menu and press
(~).
Then, select
(.... ) the [AUDIO MODE] option and press
(~).
3. Set (.... ) it to [16bit] or [12bit] and press
(~)
to save the changes,
then close the menu.
The selected audio mode is displayed for approximately 4 seconds.
The camcorder reduces the wind noise automatically (only when recording audio with the
built-in microphone). However, you can turn off the wind screen when recording indoors,
or when you want the microphone to be as sensitive as possible.
~~~)
I
r~ l~~
AUDIO SETUP
I~I
WIND SCREEN AUTO
1. Open the FUNC. menu, select (.... ) the
r~
icon and press
(~).
2. Select (.... ) the [AUDIO SETUP] menu and press (w). Then, select
(.... ) the [WIND SCREEN] option and press
(~).
3. Set (.... ) it to [OFF] and press (@) to save the changes, then close
the menu.
"~/ft"
appears when you turn the wind screen off.
49