Sound Adjustment; Setting The Mts (Multi-Channel Tv Sound); Analog Only; Selecting The Dual 1 Or Dual 2 Mode - Toshiba 32C3000A Owner's Manual

Sound adjustment

Setting the MTS (Multi-channel TV Sound)

- analog only -

Auto mode
The MTS Auto mode automatically recognize stereo/bilingual
programs depending on the broadcast signal.
1
Press M, then press Y or Z to display the SOUND
menu.
MTS
Dual
Bass
Treble
Balance
WOW
MENU EXIT
Back
2
Press V or U to select MTS, then press Y or Z to select
Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note:
If you experience noise with a particular program on whose
channel reception is usually good, try setting MTS mode to
Auto, then switch S to e Mono (monaural) (- page 22).

Selecting the dual 1 or dual 2 mode

- analog only -
You can hear only dual 1 or dual 2 sound selected, whenever
bilingual programs are received.
1
Press M, then press Y or Z to display the SOUND
menu.
2 Press V or U to select Dual, then press Y or Z to select
Dual 1 or Dual 2.
Notes:
• When the MTS setting is in Mono mode, the Dual menu is
not selectable.
• The Dual menu setting status remains even if the TV is
turned off.
Selecting the stereo programs
1
When a stereo program is received, d Stereo appears.
2
Press S to select the stereo/monaural mode. d Stereo
and e Mono appear cyclically on the screen.
Stereo
22
Using the TV's features (General)
SOUND 1/2
Auto
Dual 1
0
0
0
OK
Watch TV
- analog only -
Selecting the bilingual programs
1
When a bilingual program is received, j Dual appears.
2
Press S to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Dual 1
Display
NICAM
j Dual 1 Sub I sound
J Dual 2 Sub II sound
e Mono Main sound
Note:
These settings are not stored in the TV memory.

Adjusting the sound quality

1
From the SOUND menu, press V or U to select an item
you want to adjust.
2
Press Y or Z to adjust the settings as required.
Bass
Y
Selection
Bass weaker
Treble weaker
Balance decreases the right
channel
- analog only -
Sound to be heard
German stereo/
bilingual broadcast
Main sound
Sub sound
—
0
Z
Pressing
stronger
stronger
decreases the left
channel