Tuning The Tv For The First Time; Digital Only; Programming Channels Into The Tv's Channel Memory; Auto Scan - Digital Only - Toshiba 32C3000A Owner's Manual

Tuning the TV for the first time

- digital only -

Before switching on the TV, put your decoder and media
recorder to Standby if they are connected and ensure the
antenna is connected. To setup the TV use the buttons on the
remote control as detailed on page 10.
1
, the Welcome screen will appear. This screen
Press
will appear the first time that the TV is switched on and
each time the TV is reset.
Thank you for choosing TOSHIBA television.
First you need to tune in your television.
Please ensure aerial is connected before proceeding.
Press
2
Press Q to proceed.
3
The Select Location screen will appear. Press V or U
to select the state in which you live.
Select Location
Australian Capital Territory
New South Wales
Northern Territory
Queensland
South Australia
Tasmania
Victoria
Western Australia
MENU
Back Select Function
4
Press Q to start tuning. The Auto Scan screen will
appear and the TV will automatically start to search for
available stations. The progress bar will move along the
line.
Auto Scan
Channel 6 found...
06-0007 7 Digital
7 Digital HD
06-0070
7 Digital 1
06-0071
06-0072 7 Digital 2
06-0073 7 Digital 3
06-0077 7 Digital Guide
Scan Status 6/69
Scan Percentage
Back Select Function
5
When the search is completed, the TV will automatically
turn to the lowest logical channel number. See the
following for more details on Auto Scan.
Note:
If you do not live in Australia, press P at the Select Location.
Press M, then press Y or Z to select PROFILE.
Press V or U to select Time Zone to set your time zone
(- page 24).
Then use Manual Scan to start tuning (- page 14).
Getting started
to continue.
EXIT
Watch TV
NT
Watch TV
Programming channels into the
TV's channel memory
Auto scan
- digital only -
As new services are broadcast, it will be necessary to re-tune
the TV in order to view them.
Auto scan will completely re-tune the TV and can be used to
update the channel list. It is recommended that Auto scan is run
periodically to ensure that all new services are added. All
stored programs and settings, including Timer entries,
favorites and locked programs, will be lost.
1
Press M and Y or Z to select the SCAN menu.
2
Use V to select Auto Scan.
3
Press Q. If Password Status (- page 29) is
Enabled, Password menu will be displayed. Enter
your password using the number buttons or press 0000
(which is the default password).
Password
Blocking active
Enter PIN code
To temporarily unblock
Back
4
The Select Location will appear. Current location will
be highlighted. Press V or U to select a state in which
you live.
5
Q a confirmation screen will appear indicating ,
Press
that All existing channels will be deleted.
Continue? select Yes.
6
Press Q to start Auto tuning.
Auto Scan
Channel 6 found...
7 Digital
06-0007
06-0070 7 Digital HD
06-0071 7 Digital 1
7 Digital 2
06-0072
7 Digital 3
06-0073
7 Digital Guide
06-0077
Scan Status 6/69
Scan Percentage
Back Select Function
The above sample display shows Auto Scan in progress.
The channel number is shown as "06-0007" etc., where
"06" is the physical channel number and "0007" is the
logical channel number (which is the 4-digit number you
enter when changing channels).
7
When the search is complete, the TV will automatically
tune to the lowest logical channel number.
Watch TV
NT
Watch TV
13