Upgrading From A Hybrid Ip-Pbx To A Pure Ip-Pbx; Procedure - Panasonic KX-TDE0101 Manual

2 Upgrading from a Hybrid IP-PBX to a Pure
IP-PBX
To upgrade the system software from a Hybrid IP-PBX to a Pure IP-PBX while keeping the current user data,
it is necessary to follow the procedure below.

2.1 Procedure

Before replacing the MPR Cards, make sure that the software version of your PBX complies with the
requirements for upgrade, and the Maintenance Console is installed on the PC.
Note
Certain user data is cleared during the upgrade process.
For a list of all items cleared during upgrade, see "2.2 Data Reset After Upgrade".
1.
Back up the current system data.
i.
Back up the current system data file from the PBX to the SD Memory Card.
1.
Connect to the PBX using the Maintenance Console.
The appropriate version of the Maintenance Console will be selected automatically.
2.
From the Tool menu, select SD memory backup.
The current system data file will be copied from the PBX to the SD Memory Card.
ii.
Copy the current system data file from the SD Memory Card to the PC.
1.
From the Utility menu, select File Transfer PBX (SD Card) to PC.
2.
Select DSYS (KX-TDA100/KX-TDA200) or DLSYS (KX-TDA600) from the list of files.
3.
Click Transfer.
The Save dialogue box will be displayed.
4.
Navigate to the folder in which you want to save the file.
5.
Enter a file name.
6.
Click Save.
A window showing the download process will be displayed.
A message will be displayed when the transfer is complete.
7.
Click OK.
8.
From the File menu, select Exit.
9.
Click Yes.
The Maintenance Console will close.
Note
When using a CTI Link card or IP-GW4 card, it is recommended to delete the data of these
cards from the backup file before converting the system data.
2.
Convert the current system data file for use with the Pure IP-PBX.
i.
Start the Maintenance Console. (Do not connect to the PBX.)
ii.
From the start menu, select PBX Replacement.
iii.
Under Select PBX Replacement Type, select TDA 100/200 -> TDE 100/200 or TDA 600 -> TDE
600 in PBX Replacement Type.
iv.
Under Select Source PBX Open Mode, select By File.
v.
Click Next.
vi.
Select the source file.
vii.
Click OK.
2.1 Procedure
MPR Card Conversion Guide 5