Voice Service; Activating Voice Service - Samsung SPH-m330 User Manual

Voice Service

Activating Voice Service

Voice recognition allows you to say commands to perform common functions
supported by your phone. There is no voice training required to use the voice
recognition feature. You simply say the pre-designated command displayed on
your screen in a normal tone of voice to perform the desired function.
To activate voice recognition:
1. Press
2. Select Tools.
3. Select Voice Services.
4. Select Voice Service.
Tip: You can also activate Voice Service from standby mode by pressing and
holding the
dial prompt aloud.
5. Wait for the beep and then say one of the following commands:
•
Contact Name
•
Contacts
When it recognizes one of these commands, the phone launches the associated
application. If the phone does not hear a command within approximately eight
seconds, it de-activates voice recognition without taking any action.
Using Voice Dial
Voice Dial allows you to dial by pronouncing a name stored in your Contacts.
Tip: Voice Dial works best in quieter environments.
To place a call using Voice Dial:
1. Activate voice recognition by pressing and holding
prompts you for a command.)
2. Say a name stored in your Contacts or Messages to launch the
associated application.
32 Voice Service
for Menu.
key, or you can press and hold the speaker key to hear the voice
•
Messages
. (The phone