LG PN45 series Owner's Manual page 16

16
ASSEMBLING AND PREPARING
To detach the stand
(Only 50PN45**, 50PN65**)
1
4 EA
M5 x 16
2
1 EA
M5 x 16
1
Protection
cover
2
CAUTION
y When attaching the stand to the TV set, place the
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
y Make sure that the screws are inserted correctly
and fastened securely. If they are not fastened
securely enough, the TV may tilt forward after
being installed. Do not use too much force and
over tighten the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
y Remove the stand before installing the TV on a
wall mount by performing the stand attachment in
reverse.
y When installing the wall mounting bracket, use the
Protection cover.
y This will protect the opening from accumulating dust
and dirt.