Replacing The Ups Battery - Step Two; Replacing The Ups Battery - Step Three; Recycling The Used Battery - AMX NXA-UPS1500 Operation/Reference Manual

Amx uninterruptible power supply operation/reference guide
Hide thumbs Also See for NXA-UPS1500:
Table of Contents

Advertisement

Battery Replacement

Replacing the UPS Battery - Step Two

Remove the two screws that secure the Battery Compartment Cover (FIG. 22)
FIG. 22 Replacing the Battery - Step 2

Replacing the UPS Battery - Step Three

Disconnect the four-pin power connector from the battery wiring harness from the power connector
inside the unit, and slide the battery tray out of the unit (FIG. 23):
FIG. 23 Replacing the Battery - Step 3

Recycling the Used Battery

Contact your local recycling or hazardous waste center for information on proper disposal of the used
battery.
24
NXA-UPS1500 Uninterruptible Power Supply

Advertisement

Table of Contents
loading

Table of Contents