Valve Removal; Manifold Removal - GE JGP989 Technical Service Manual

Valve Removal

1. Remove the burners and top (see Burner and
Top Removal ).
2. Lift the igniter switches off the valve stems.
(Note the color and positions of the switches.)
3. Remove the 1/2-in. nut on the gas line to the
valve and remove the gas line.
4. From under the counter, remove 7 screws
(1/4-in.) from the panel under the valves.
5. Remove the 1/4-in. screw from the bottom of
the manifold and remove the valve.

Manifold Removal

1. Remove the burners and top (see Burner and
Top Removal ).
2. Lift the igniter switches off the valve stems.
(Note the color and positions of the switches.)
3. Remove the 1/2-in. nuts (4) on the gas lines to
the valves and remove the gas lines.
4. Remove the gas fitting located under the
counter from the manifold.
5. From under the counter, remove 9 screws (1/4-
in.) from the 2 panels under the valves.
– 16 –