GE Profile WPDH8800J Technical Service Manual page 43

Note: Place the door on a soft, protected fl at
surface so that the door glass faces up. (The door
should rest on the handle side.)
4. Remove the 10 Phillips-head screws that hold
the door cover and door strike to the door
frame.
5. Lift and unsnap the door cover from the door
frame.
6. Lift the door glass out of the door frame.
Door Glass
7. Remove the 9 Phillips-head screws that attach
the protect cover and ring to the door frame.
8. Lift and remove the protect cover and ring.
Note: The door handle and door frame are replaced
as an assembly. (Part # WH46X10210)
Door Handle
– 43 –
Protect Cover
Door Frame
Ring