Advertisement
CAUTION
This package contains small parts
in its unassembled state.
Adult assembly is required.
IMPORTANT! Before assembly and each use, inspect this
product for damaged hardware, loose joints, missing parts or
sharp edges. DO NOT use if any parts are missing or broken.
Contact Fisher-Price
®
for replacement parts and instructions
if needed. Never substitute parts.
Rear Base
1
• With the Fisher-Price
®
logo facing out, fit the tapered frame tube
into the rear base.
Assembly
Tapered Frame Tube
2
• Fit a #8 x ¾" screw with retainer into the rear base and tighten.
• Repeat steps 1 and 2 to assemble the other frame to the rear base.
Frame Latches
3
• Lay the frame assembly down with long frame tubes up.
• Position the seat support with the frame latches down.
• Slide the seat support onto the frame tubes.
Hint: Push the seat support all the way to the top of the assembly.
You will hear several "clicks".
4
Seat Support
Frame Tubes
Frame Assembly
Advertisement
