Table of Contents
Advertisement
Pedal Hubs
Pedal Axle
Hole
5
• While holding the pedal hubs on
the pedal axle, insert the pedal
axle through the hole in the center of the front wheel.
• Push the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
Pedal Hub
Pedal Hub
6
• Turn the front wheel assembly over.
• Insert the remaining pedal hubs on
top of and below the pedal axle and into the hole in the
center of the front wheel.
• Push the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
Assembly
Front
Wheel
• Fit a pedal on the pedal axle. Tap the pedal with a
• Pull the pedal up to be sure it is secure. If you can
• Repeat this procedure to attach the other pedal to the
• Place the front wheel assembly between the fork arms.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x
• Repeat this procedure to attach the other fork cover to
4
7
hammer until it is secure.
remove it, you have not secured it properly. Tap it
with the hammer again.
other end of the pedal axle.
Fork Cover
Pedal
Axle
8
Make sure the pedal axle fits into the groove at the
bottom of each fork arm.
" screws into the fork cover and tighten.
3
/
4
the other fork arm.
Pedal
Pedal Axle
Scrap Block
of Wood
Fork
Arms
Groove
Advertisement
Table of Contents
