Table of Contents
Advertisement
Straight
Axle
Cap Nut
Cap Nut
Assembly
Tool
Scrap Block
of Wood
1
• Fit a cap nut into the cap nut assembly tool. Place one
end of the straight axle into the cap nut.
• Tap the end of the straight axle with a hammer.
Make sure the cap nut is securely attached to the
straight axle.
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Hole
Straight Axle
2
Bottom View
• Turn the frame upside-down.
• Insert the straight axle through the holes in the rear of
the frame.
Assembly
Rear Wheel
(Indented Side
Down)
Hubcap
(Peg Side
Up)
Straight Axle
• Turn the frame on its side with the exposed end of the
• Place the cap nut assembly tool under the assembled
• Slide a rear wheel (indented side up) onto the end of
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle. Tap the
Frame
• Insert one of the tabs on a cover into a slot in the hub-
Hole
• Fit two pedal hubs onto the pedal axle tabs. Make sure
3
Cap Nut
Rear Wheel
(Indented Side Up)
Straight Axle
Cap Nut
Assembly Tool
3
Bottom View
straight axle up.
rear wheel and onto the cap nut.
the straight axle.
cap nut with a hammer. Gently pull the rear wheel up
to be sure the cap nut is securely attached to the
straight axle.
cap. Push to snap the cover into place. Repeat this
procedure to attach the other cover to the other hubcap.
Pedal Axle
Pedal
Hub Slot
4
the tabs fit into the slot in each pedal hub.
Hubcap
(Peg Side
Down)
Cover
Hubcap
Scrap
Block of
Wood
Tab
Advertisement
Table of Contents
