Technical Data Technical Data - Jonsered BC2125 Operator's Manual

Technical data
Technical data
Engine
3
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litre
Weight
Weight without fuel, cutting attachment and guard, kg
Noise emissions
(see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Noise levels
(see note 2)
Equivalent noise pressure level at the operator's ear,
measured according to EN/ISO 11806 and ISO 7917,
dB(A), min./max.:
Vibration levels
Vibration levels at handles, measured according to EN/
ISO 11806 and ISO 7916, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator's ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.
TECHNICAL DATA
BC 2125
24,5
32
27
2700
11000-11700
8014
0,9/9000
No
Yes
WalbroMB/SEM AM49
NGK BPMR 7A/Champion RCJ 7Y
0,5
Zama C1Q
0,5
4,5
108
dB(A) 110
WA
91/97
2
1,1/1,0
1,6/1,9
1,5/1,3
5,5/3,5
) in conformity with EC directive 2000/14/EC.
WA
– 29
English