Consumer Information WARNING Prevent Entanglement Injury • Keep mobile out of baby’s reach. • Remove mobile portion of product from crib or playpen when baby begins to push up on hands and knees. • This product may not attach to all crib designs. Do not add additional strings or straps to attach to crib or playpen.
Page 4
Parts 3 Toys 3 Thick Spokes 3 Th k Sp Mobile Cap Mobile Arm 3 Thin Spokes Base Note: All of the screws used to assemble this toy are attached to the product. Follow these instructions carefully to fully secure the screws. Tighten and loosen all screws with a Phillips screwdriver.
Battery Installation 1,5V x 3 "C" (LR14) • Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert three "C" (LR14) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life. •...
Page 6
Assembly Thin Spoke Thin Spoke Thin Spoke • Fit the thin mobile spokes onto the pegs on the mobile arm. Hint: The spokes are designed to fit on alternating pegs one way. If a thin spoke does not seem to fit, try the next peg. Thick Spoke Thick Spoke Thick Spoke...
Page 7
Assembly Mobile Cap • Fit the mobile cap over the ends of the thin and thick spokes and onto the top of the mobile arm. • Tighten the screw in the mobile cap. • Fit the T-end of the strap on each mobile toy through the slot in each thick spoke. •...
Page 8
Assembly Base • First, press the button on the base next to the socket and then slide the socket door open • Fit the mobile arm into the socket in the base and tighten both screws.
Crib Attachment IMPORTANT! Always attach all provided fasteners (strings, straps, clamps, etc.) tightly to a crib or playpen according to the instructions. Do not add additional strings or straps to attach to a crib. Check frequently. Crib Rail Attachment Strap Attachment Strap IMPORTANT! If you are attaching this toy to a crib side rail that can be lowered and raised, make sure the crib side rail is in the raised (locked) position whenever...
Page 10
Crib Attachment Bottom of Base Bottom of Base Mattress Mattress At Least 7 Inches (18cm) At Least 7 Inches (18cm) • Make sure the distance between the bottom of the product and the crib mattress is at least 7 inches (18cm). •...
Page 11
Press Press Spin Spin Power/Volume Switch Power/Volume Switch • Slide the switch to ON with low volume or ON with high volume . When finished using the product, slide the switch OFF Music Switch Music Switch • Slide the switch to select: Soothing Active Mobile Switch...
Page 12
Convert to Music Box Remove the mobile and use as a music box! • Loosen both screws in the arm near the base. Lift and remove the arm. • Close the socket door on top of the base. Hint: The socket door must be completely closed for use as a music box. •...