Furuno CH-270 Installation Manual page 17

Flush mounting the display unit
Name
Fixing Metal
Tapping Screw
Hex. Bolt
1. Cut out hole (207(H) X 287(W)) in mounting location.
2. Fasten the fixing metal to the display unit with four hex. bolts (M4X12).
3. Using four tapping screws (5X20), fasten the fixing metal attached at step 2 to the
mounting location.
Flush mounting the control unit
Type OP02-83-1.5, Code no. 001-413-600 (1.5 m cable)
Name
Fixing Metal
Tapping Screw
Hex. Bolt
Cable Assy.
1. Cut out hole (87(H) X 287(W)) in mounting place.
2. Fasten the fixing metal to the control unit with two
hex. bolts (M4X12).
3. Using four tapping screws (5X20), fasten the
fixing metal assembled at step 2 to the mounting
location.
Flush Mount Kit for Display Unit
(Type OP06-17, Code no. 006-556-310)
Type
06-021-1321
5X20
M4X12
Flush mount kits for control unit
Type OP03-83-5, Code no. 001-413-610 (5 m cable)
Type OP06-18, Code no. 006-556-320 (no cable)
Type
06-021-2101
5X20
M4X12
MJ-A10SPF0002-015
MJ-A10SPF0002-050
Code No.
100-279-622
000-802-840
000-882-040
Code No. Qty
100-279-731 1
000-802-840 4
000-882-040 2
000-142-878
1
000-131-411
5
Qty Remarks
1
4
4
Remarks
1.5 m
Choose
either one.
5 m
Hex. Bolts
Fixing Metal