Download Print this page
Dimplex AC3CN User Manual
Dimplex AC3CN User Manual

Dimplex AC3CN User Manual

Recessed ceiling heater/ over door heater

Advertisement

SCALE
0.250
AC3CN Recessed Ceiling Heater / Over Door Heater
08/19239/4 - Issue 7
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and
EN60555-3. These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC

Advertisement

loading

Summary of Contents for Dimplex AC3CN

  • Page 1 SCALE 0.250 AC3CN Recessed Ceiling Heater / Over Door Heater 08/19239/4 - Issue 7 The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2 and EN60555-3. These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC...
  • Page 2 IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE IMPORTANT SAFETY ADVICE DO NOT COVER OR OBSTRUCT the air inlet or outlet grille. ENSURE THE APPLIANCE IS EARTHED. Do not use this heater in areas where excessive dust exists. This heater must not be located immediately above or below a fi...
  • Page 3 The ceiling can be either of a plasterboard (or similar) construction, or of suspended ceiling tiles. DO NOT store or use any fl ammable materials or sprays in the vicinity of the heater – FIRE HAZARD. DO NOT insert any foreign objects into the heater openings. Risk of injury, electric shock or damage to the heater may occur.
  • Page 4: Electrical Connection

    AC3CN ∼ 230-240 General The carton contains: - • 1 x AC3CN heater • 1 x Switch box This Recessed Ceiling Heater / Over Door Heater is a robust heater intended for installation into a suspended or plasterboard ceiling. For optimum results, do not install this product in ceilings higher than 3 metres.
  • Page 5: Installation Of Heater

    WARNING: The Switch Panel should not be installed in a toilet or washroom. to the Switch Panel. The backing box (standard B.S. double gang as shown in Fig. 5) should be Switching the switch marked ‘I’ (see ‘1’ in Fig. 5) energises the fan and switches fi...
  • Page 6: Procedure For Resetting Cut-Out

    Should you require after sales information or assistance with this product please go to www.dimplex.co.uk where you will fi nd our self help guide by clicking on “After Sales” or ring our helpdesk on the number shown on the rear of this booklet.
  • Page 8 Republic of Ireland Tel. 01 8424833 SO30 2DF © GDC Group Ltd, All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Dimplex. A division of GDC Group Ltd.