Charge The Battery; Insert The Memory Card - Nokia E75 User Manual

4. Align the contacts of the battery with the
corresponding connectors on the battery
compartment, and insert the battery in the
direction of the arrow.
5. Close the back cover.

Charge the battery

Your battery has been precharged, but the charging
levels may vary.
1. Connect the charger to a wall outlet.
2. Connect the charger to the device. You can use your
device while it is charging.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
To reach the full operation time, charge the battery
until it has been fully charged according to the battery
level indicator.
Tip: If you have old compatible Nokia chargers,
you can use them with the Nokia E75 by
attaching the CA-44 charger adapter to the old
charger. The adapter is available as a separate
enhancement.
USB charging
You can use USB charging when a wall outlet is not
available. When charging your device with the USB
cable, the charging time is longer.
With USB charging, you can also transfer data with USB
cable while charging the device.
1. Connect a compatible USB device to your device
using a compatible USB cable.
Depending on the type of the device that is used for
charging, it may take a while for charging to start.
2. If the device is switched on, select from the
available USB mode options on the display of the
device.

Insert the memory card

Use a memory card to save the memory on your device.
You can also back up information from your device to
the memory card.
Use only compatible microSD cards approved by Nokia
for use with this device. Nokia uses approved industry
15