City Water Connection - Roadtrek 170 Owner's Manual

Hide thumbs Also See for Roadtrek 170:
Table of Contents

Advertisement

The fresh water tanks can also be filled through the city tank
fill valve located behind the small lockable driver side
rear access door, for location, see the Daily Living section.
The use of the city fill is not possible when in the winter
operation mode.
To fill the tank:
1. Prior to using the city fill ensure water system is in
summer operation mode, (see mode switching).
Connect a hose to the city water connection,
(see Picture G-P3).
2. To fill the fresh water tanks, open the city tank fill
valve, (see Picture G-P4).
3. Open the water source moderately.
4. When the tank is full, water will overflow in the
same manner as when using the gravity fill,
(see previous page).
5. Close the city tank fill valve,
(see Picture G-P5).

CITY WATER CONNECTION:

NOTE: City water connection can only be used in summer
operation mode. This supplies the 190 models with dual
fresh water tank system.
The city water inlet connection is located in the small
compartment behind the large lockable driver side storage
compartment, (see Picture G-P3). To connect the water
system to an outside source:
1. Ensure that the water pump is turned off.
2. Close the city tank fill valve by turning the handle
to the vertical position, (see Picture G-P5).
3. Be sure that all interior faucets are closed to
prevent spillage.
4. Open the city water source slowly to prevent
excessive water force inside your vehicle. To protect
your system from excessive pressure from water
supply systems encountered in some areas, a water
pressure regulator should be used. Such a regulator
is not supplied with your vehicle.
5. The city water connection by-passes the water
pump and fresh water tank. Therefore, the use
of these items is not necessary when connected
directly to an external water source.
Doc No: 21906503 Rev: 05
Picture G-P3: Location of the city water connection.
Picture G-P4: Open position of the city tank fill
valve.
Picture G-P5: Closed position of the city tank fill
valve.
Copyright © Roadtrek Motorhomes Inc. 2007
WATER SYSTEMS
City
water
inlet
connection
Red handle
open position
Red handle
closed position
G - 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents