Mechanical Disassembly
Mechanical disassembly should be made following procedures in numerical or-
der.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause loss of performance and product safety.
1. Lamp cover and prism cover removal
2. Cabinet top removal
3. Fan (FN905) and main&AV board removal
4. Shutter and sensor C board removal
5. Lamp, lamp cover and ID connect board
removal
6. Projection lens removal
7. Optical unit removal
8. Power box and thermal SW (SW902)
removal
9. Control board and fans (FN902, FN903,
FN904) removal
10. Filter assy removal
11. Fans (FN908, FN909, FN910) removal
12. Fans (FN906, FN907, FN911) and
speaker removal
13. Cable reforming
3-1. Main board and A/V board removal
7-1. Lens shift assy and Iris assy removal
8-1. Thermal fuse replacing
8-2. Power box disassembly and fan
(FN901) removal
-23-
Screws expression
(Type
) mm
Diameter x Length
T type
M type