GE JGB910 Technical Service Manual page 10

REINSTALLING CONTROL PANEL
When reinstalling the control panel, push up
on the vent lip with your fingers. At the same
time, pull forward on the control panel,
making sure that the vent lip is tucked under
the control panel while lowering the panel
into place.
TUCK VENT LIP UNDER CONTROL
PANEL PRIOR TO LOWER PANEL
LOWER PANEL
INTO PLACE
PUSH UP ON
VENT LIP
SPARK MODULE
SPARK MODULE
The spark module is located behind the control panel on
The spark module is located behind the
the right side. You must remove the control panel to
control panel, on the right side. You must
access the spark module.
remove the control panel to access the
spark module.
BALLAST
– 8 –
SPARK
MODULE
TABS
GEA00127