Safety Rules - Ariens 946152 Operator's Manual

CAUTION: POTENTIALLY
HAZARDOUS SITUATION! If not
avoided, MAY RESULT in minor or
moderate injury. It may also be
used to alert against unsafe
practices.
NOTATIONS
NOTE: General reference information for
proper operation and maintenance practices.
IMPORTANT: Specific procedures or
information required to prevent damage to unit
or attachment.
PRACTICES AND LAWS
Practice usual and customary safe working
precautions, for the benefit of yourself and
others. Understand and follow all safety
messages. Be alert to unsafe conditions and
the possibility of minor, moderate, or serious
injury or death. Learn applicable rules and
laws in your area.
REQUIRED OPERATOR TRAINING
If unit is to be used by someone other than
original purchaser, loaned, rented or sold,
ALWAYS provide this manual and any needed
safety training before operation.
SAFETY DECALS AND
LOCATIONS
ALWAYS replace missing or damaged Safety
Decals. Refer to (Figure 2) below for Safety
Decal locations.
OX0115
Figure 2
1. DANGER! TO AVOID SERIOUS
INJURY OR DEATH
OL1801
OL4740
OL4370
OL0910
OL4620
OL4610
• Keep safety devices (guards,
shields, switches, etc.) in place and
working.
• Look down and behind before and
while moving backwards.
05230800B
• Do not let debris accumulate.
1
Debris could become a fire hazard
or cause engine to overheat.

SAFETY RULES

If unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALWAYS provide this manual and any needed
safety training before operation.
Read, understand and follow all safety
practices in Owner/Operator Manual before
beginning assembly. Failure to follow
instructions could result in personal injury and/
or damage to unit.
GB - 4
Read the Operator's Manual.
Always wear protective
glasses, goggles or a face
shield.
Always wear adequate
hearing protection.
Do not operate when
children or others are
around.
Remove objects that could
be thrown by the cutter line.
Keep body parts away from
rotating cutter line.
Go across slopes, not up and
down.