Safety Rules - Ariens String Trimmer Manual

Go across slopes, not up and
down.
• Keep safety devices (guards,
shields, switches, etc.) in place and
working.
• Look down and behind before and
while moving backwards.
• Do not let debris accumulate.
Debris could become a fire hazard
or cause engine to overheat.

SAFETY RULES

If unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALWAYS provide this manual and any needed
safety training before operation.
Read, understand and follow all safety
practices in Owner/Operator Manual before
beginning assembly. Failure to follow
instructions could result in personal injury and/
or damage to unit.
ALWAYS disconnect wire from spark plug
before assembly. Unintentional engine start up
can cause death or serious injury.
Complete a walk around inspection of unit and
work area to understand:
• work area
• your unit
• all safety decals.
Clear work area of stones, sticks, wire and
foreign objects which might be picked up and
thrown. Tall grass can hide obstacles.
Know the work area. Stay alert for holes, rocks,
rough terrain and hidden hazards.
Keep away from drop-offs, ditches, or
embankments that could cause operator to
lose footing or control of unit.
ALWAYS be aware of traffic when operating
along streets or curbs.
Keep work area clear of all persons, children
and pets.
Keep children out of the work area and under
the watchful care of a responsible adult.
ALWAYS operate unit when there is good
visibility and light.
Do not operate trimmer in wet grass.
ALWAYS be sure of your footing. Keep a firm
hold on handlebar. Walk, NEVER run.
Whenever operator releases control on
handlebar, trimmer head must stop. Check this
feature frequently. If feature fails to operate,
disconnect spark plug wire and adjust or have
it repaired before using unit.
Only trained adults may operate unit. Training
includes actual operation.
NEVER operate after or during the use of
medication, drugs or alcohol. Unit requires
complete and unimpaired attention.
NEVER allow children to operate trimmer.
ALWAYS keep hands and feet away from
rotating parts. Rotating parts can cut off body
parts.
ALWAYS keep hands away from pinch points.
Fumes from engine exhaust can cause death
or serious injury. DO NOT run engine in an
enclosed area.
ALWAYS protect eyes, face, and body with
adequate safety gear and protective clothes.
Wear sturdy footwear, gloves and safety
goggles or safety glasses with side shields
while operating mower.
NEVER operate trimmer barefoot or when
wearing open sandals or canvas shoes.
NEVER wear loose clothes, long hair or jewelry
that may get caught in rotating parts.
Protect eyes, face and head from objects that
may be thrown from unit.
ALWAYS stand clear of discharge when
operating unit.
NEVER direct discharge toward bystanders.
Operator is responsible for bystander safety.
DO NOT touch hot parts. Allow parts to cool.
Keep safety devices or guards in place and
functioning properly. NEVER modify or remove
safety devices.
Read, understand, and follow all instructions in
the manual and on the machine before starting.
Understand:
• How to operate all controls
• The functions of all controls
• How to STOP in an emergency.
DO NOT attempt to start your engine until you
know what the controls do and how they work.
DO NOT tilt trimmer when starting it.
Keep feet away when starting engine.
DO NOT operate trimmer unless trimmer shield
and trailing shield are installed. Objects may be
picked up and thrown causing damage or
personal injury.
NEVER use wire or wire-rope in place of the
cutting line. It can break off and become a
dangerous projectile. Use only flexible, non-
metallic line recommended by Ariens .
ALWAYS keep trimmer head in contact with the
ground while operating.
Take all possible precautions when leaving unit
unattended.
ALWAYS shut off engine and disconnect spark
plug wire to prevent accidental starting or
unauthorized use.
Stop engine if anyone enters the work area.
NEVER attempt to make any adjustments to
unit while engine is running (except where
specifically recommended). Stop engine,
disconnect spark plug wire and wait for all
moving parts to stop before servicing.
DO NOT make cutting height adjustments
while the engine is running.
EN - 5