Table of Contents
Advertisement
Assembly
M3.5 x 25 mm
Screw
Hole
Armrest
Seat Hub
Seat Hub
Armrest
M3.5 x 25 mm
9
Screw
• Insert an M3.5 x 25 mm washer head screw into the hole under
each armrest. Tighten the screws with a Phillips screwdriver.
Seat Tubes
Notch
Tab
11
Lever
• While continuing to press the seat height adjustment levers, slide a
seat tube up through the socket in each seat hub.
Hint: One of the seat tubes includes a tab. Match this seat tube with
the socket that has a notch.
Lever
Lever
10
• Press the seat height adjustment levers on each side of the seat.
7
Advertisement
Table of Contents
